| BEARINGS and GEARS | ||
|---|---|---|
| Part Number | Description | *SNI Price |
| 12-010-BGK | Table Vertical Bearing Grease Fitting Kit, including Labor | 2,500.00 |
| 12-053-005 | Shaft, Concentric for AAE-01700 'V' Bearing | 40.00 |
| AAB-63010 | Single Row Radial Bearing, 12ID 37OD 12W | 16.00 |
| AAE-01700 | Bearing, 'V' Rail [see 12-053-005 for concentric shaft] | 100.00 |
| AAF-04000 | Stud type cam follower | 98.00 |
| AAF-05200 | Bearing, Table Lead Screw | 165.00 |
| AFN-64064 | Nylon Spur Gear, 64 Teeth (included with String Pot Assy) | 18.00 |
| AFN-64127 | Nylon Spur Gear, 127 Teeth (included with String Pot Assy) | 24.00 |
| BELTS and CHAINS | ||
| Part Number | Description | *SNI Price |
| AGC-04070 | Cable Chain (Table Longitudinal Pot. Drive) | 28.00 |
| AGC-04090 | Cable Chain (Table Lateral Pot. Drive) | 34.00 |
| AGC-04120 | Cable Chain (Gantry rotate pot) | 43.00 |
| AGC-04150 | Cable Chain (Gantry Rotate Pot) | 52.00 |
| ASB-03400 | Table Vertical 'V' Belt | 18.00 |
| ASB-19006 | Poly-V Belt, 6 rib, 19 inch | 21.00 |
| ASB-22006 | Poly-V Belt, 6 rib, 22 inch | 21.00 |
| ASC-21100 | Belt (SAD, SID Lead screw drive) | 39.00 |
| CASSETTE HOLDERS | ||
| Part Number | Description | *SNI Price |
| 12-006-002 | Guide Rail, for Cassette Holder (no retainer tab) | 114.00 |
| 12-006-003 | Guide Rail, for Cassette Holder (retainer tab side) | 130.00 |
| 12-006-004 | Grid Track | 52.00 |
| 12-006-005 | Leaf Spring, Grid Retainer | 20.00 |
| 12-006-007 | Cassette Retainer, Side Spring Plate | 46.00 |
| 12-006-032 | Pivot Bar, Sensing Device | 18.00 |
| 12-006-033 | Pivot Pin, Sensing Device | 6.00 |
| 12-006-034 | Spring Extension Bracket, Sensing Device | 15.00 |
| 12-006-038 | Bushing, Brass Pivot, Sensing Device | 14.00 |
| 12-022-000 | Cassette Holder Assembly for 9-inch Image Intensifier | 2,110.00 |
| 12-023-000 | Cassette Holder Assembly for 12-inch Image Intensifier | 2,110.00 |
| AHA-12007 | Ball Plunger (Cassette Rotate Assy.) | 18.00 |
| AKT-06332 | Extension Spring (Cassette Sensor) | 3.00 |
| GS-28 | Cassette retainer | 16.00 |
| GS-30-A | Leaf Spring, Cassette Holder Side Spring | 10.50 |
| CIRCUIT BOARDS | ||
| Part Number | Description | *SNI Price |
| KEE-00031-020 | C.P.U. PCB, w/ Adsmon 9.00 (“Card Cage” version) | 1,750.00 |
| KEE-00058 | Gantry Interface PCB (“Card Cage” version) | 1,375.00 |
| KEE-00063-020 | Wall Display Controller PCB | 510.00 |
| KEE-00108-024 | KB Motor Driver, 24 volt | 289.00 |
| KEE-00108-090 | KB Motor Driver, 90 volt | 214.00 |
| KEE-00181-010 | Wall Display Receiver PCB (Gantry, Collimator) | 650.00 |
| KEE-00181-020 | Wall Display Receiver PCB (SID, SAD) | 650.00 |
| KEE-00181-030 | Wall Display Receiver PCB (X-, Y-Wire, Table Long.) | 650.00 |
| KEE-00181-040 | Wall Display Receiver PCB (Table Ver., Table Lat.) | 650.00 |
| KEE-00183-010 | KAP PCB, Ansley-to-Panduit adapter | 82.00 |
| KEE-00252-020 | Table Control PCB | 338.00 |
| KEE-00270-010 | Collision Detector PCB | 280.00 |
| KEE-00304-020 | I/O PCB | 2,627.00 |
| KEE-00305-010 | CPU/Memory PCB (excluding firmware) (“Stand-Alone” version) | 1,200.00 |
| KEE-00364-010 | X/Y Controller PCB | 1,150.00 |
| KEE-00384-010 | Hand Pendant PCB (for Cylinder shaped Pendant) | 1,060.00 |
| KEE-00401-010 | A/D PCB (“Stand-Alone” version) | 1,500.00 |
| KEE-00477-010 | Motor Driver Control PCB | 266.00 |
| KEE-00484-010 | Collision Alarm PCB | 291.00 |
| KEE-00614-010 | A/D PCB (“Card Cage” version) | 1,500.00 |
| KEE-00832-010 | I.O. Interface PCB (“Card Cage” version) | 850.00 |
| KEE-00869-010 | Memory PCB (excluding firmware) (“Card Cage” version) | 1,200.00 |
| KEE-00876-010 | Joystick Comparer PCB | 486.00 |
| KEE-00880-010 | Table Speed Relay PCB | 435.00 |
| KEE-00911-010 | Lamp Power Supply PCB | 95.00 |
| KEE-00977-010 | Switch Decoder PCB | 344.00 |
| KEE-00991-020 | Power Supply | 1,080.00 |
| KEE-01112-020 | Dynamic Brake Kit (Table vertical) [includes technical support] | 500.00 |
| COLLIMATOR & WIRE DEVICE | ||
| Part Number | Description | *SNI Price |
| 12-021-016 | Collimator Aperture Bracket | 25.00 |
| 12-038-039 | Brass Mounting Block, for Delineator Wires | 18.00 |
| 12-038-043 | Bead Tray Carrier | 110.00 |
| 12-038-047 | Cross Hair Tray | 105.00 |
| 12-038-048-05 | 100 cm Bead Tray | 351.00 |
| 12-038-048-06 | 80cm Bead Tray | 351.00 |
| 12-068-000 | Custom Blocker Tray, per Customer Specifications to match Accelerator Tray | 2,500.00 |
| 12-069-080 | 80cm Bead Tray Assembly | 480.00 |
| 12-069-100 | 100cm Bead Tray Assembly | 480.00 |
| 12-070-000 | Cross Hair Tray Assembly | 250.00 |
| AHL-02007 | Tungsten Delineator Wire | 10.00 |
| KEE-02003 | Wire Device Ribbon Cable Assembly (96 inch standard length) | 98.00 |
| KEE-02004 | Wire Device Ribbon Cable Assembly, multi-connnector daisy chain | 155.00 |
| VCO-00354 | Lamp Socket (Collimator, SSD) | 15.00 |
| VLD-00165 | Bulb, 24 volt, 150 watt | 15.00 |
| VSC-00401 | Triac, Machlette Collimator Lamp Driver | 60.00 |
| COLLISION SENSORS | ||
| Part Number | Description | *SNI Price |
| 12-071-000-S | Cassette Collision Sensor | 840.00 |
| 12-072-000-S | Custom Blocker Tray Sensor. Size custom to site. | 600.00 |
| 12-075-000 | Mini Sensor, round | 774.00 |
| NOTE: Please see CASSETTE HOLDERS for mounting hardware | ||
| DIALS and SCALES | ||
| Part Number | Description | *SNI Price |
| 12-003-008 | Pointer, Gantry Dial | 28.00 |
| 12-003-044 | Gantry Dial, 360 Degree Clockwise | 525.00 |
| [price without core return] | [700.00] | |
| 12-003-043 | Gantry Dial, 360 Degree Clockwise | 525.00 |
| [price without core return] | [700.00] | |
| 12-082-009 | SID Scale (dual: 108-158 cm, 88-138 cm) | 143.00 |
| 12-082-014 | SAD Scale (80-130 cm) | 53.00 |
| ELECTRICAL COMPONENTS: | ||
| Hardware and Miscellaneous | ||
| Part Number | Description | *SNI Price |
| VHM-00154 | 2 Axis Joystick Assembly | 179.00 |
| Lenses, Lamps, and Displays | ||
| Part Number | Description | *SNI Price |
| VLD-00011 | Lamp, 28V (for VSW-00001 Switch) | 5.00 |
| VLD-00052 | Lens, round, male, red, ‘OFF’ | 15.00 |
| VLD-00101 | Square Lens Cap, White, 'ON' (Hand Pendant) | 15.00 |
| VLD-00106 | Square Lens Cap, White, 'MOT ENA' (Hand Pendant) | 15.00 |
| VLD-00145 | Lamp, 14volt | 2.00 |
| VLD-00149 | Lamp, 28volt | 2.00 |
| VLD-00165 | Bulb, 24 volt, 150 watt | 15.00 |
| Potentiometers | ||
| Part Number | Description | *SNI Price |
| VPO-00013 | 2Kohm 10 Turn Potentiometer | 76.00 |
| Resistors | ||
| Part Number | Description | *SNI Price |
| VRE-00097 | Resistor, 0.015 ohm 5W | 12.00 |
| VRE-00098 | Resistor, 0.035 ohm 5W | 12.00 |
| VRE-00298 | Resistor, 1 ohm 55W | 26.00 |
| VRE-00322 | Resistor, 2.5 ohm 300 watt (Raytheon generator) | 75.00 |
| VRE-00350 | Resistor, 0.2 ohm 300 watt (Raytheon generator) | 95.00 |
| VRE-00351 | Resistor, 0.4 ohm 300 watt (Raytheon generator) | 91.00 |
| VRE-00353 | Resistor, 10 ohm 50 watt (rotor drive; Raytheon generator) | 30.00 |
| Relays | ||
| Part Number | Description | *SNI Price |
| VRY-00002 | Relay, 24 volt DC, 3 pole, socket mount | 42.00 |
| VRY-00003 | Relay, 24 volt DC, 2 pole, panel mount | 75.00 |
| VRY-00014 | Relay, 24 volt DC, 2 pole, dip | 9.00 |
| VRY-00015 | Relay, 12 volt DC, 2 pole, dip | 15.00 |
| VRY-00018 | Relay, Solid State, 25 Amp@240VAC | 65.00 |
| VRY-00019 | Relay, Solid State, PCB mount | 81.00 |
| VRY-00020 | Relay 24VDC, 2 Pole, Flange Mount | 33.00 |
| VRY-00022 | Relay, 24VAC, 4PDT, 5A (Raytheon generator) | 18.00 |
| VRY-00023 | Relay, 12VDC, 4PDT, 5A (Raytheon generator) | 20.00 |
| VRY-00026 | Relay, 12V, SPDT, panel mount (Raytheon Generator) | 75.00 |
| Semiconductors | ||
| Part Number | Description | *SNI Price |
| VSC-00001 | +5V Voltage Regulator | 2.00 |
| VSC-00004 | -12V Voltage Regulator | 1.00 |
| VSC-00009 | +12V Voltage Regulator | 2.50 |
| VSC-00020 | Diode, 600V 1A, 1N4005 | 1.00 |
| VSC-00032 | MOV, 47Z7 30VAC 38VDC | 2.00 |
| VSC-00035 | Transistor, TIP110 | 2.00 |
| VSC-00054 | I.C., MC6840 Programmable Timer | 12.00 |
| VSC-00057 | I.C., MC14495P1 7-segment LED Driver | 8.00 |
| VSC-00058 | I.C., MC3486 Line Receiver | 5.00 |
| VSC-00059 | I.C., MC3487 Line Driver | 5.00 |
| VSC-00061 | I.C., MC6821 or MC68B21 PIA | 11.00 |
| VSC-00062 | I.C., MC1408L8 D/A Converter | 6.00 |
| VSC-00066 | I.C., 4515 CMOS 4 to 16 Line Decoder | 5.00 |
| VSC-00077 | I.C., 4N37 Opto-Coupler | 5.00 |
| VSC-00098 | I.C., 74LS165 Parallel In Serial Out | 4.00 |
| VSC-00111 | I.C., 7432 Quad OR | 1.00 |
| VSC-00114 | I.C., H11A1 Opto Triac | 5.00 |
| VSC-00115 | I.C., H11C1 Opto SCR | 5.00 |
| VSC-00123 | I.C., MCT-6 Opto-Coupler | 4.00 |
| VSC-00137 | I.C., ULN2003 Inverter Driver | 5.00 |
| VSC-00143 | I.C., OMA-120 Opto-Fet | 15.00 |
| VSC-00146 | I.C., AD7506KN Multiplexer [see also VSC-00407] | 48.00 |
| VSC-00148 | I.C., ULN2004 Inverter Driver | 5.00 |
| VSC-00149 | I.C., LM358 Op Amp | 4.00 |
| VSC-00194 | I.C., LM339N Dual Comparater | 3.00 |
| VSC-00279 | I.C., MOC-3032 Opto Triac | 4.00 |
| VSC-00401 | Triac, Machlette Collimator Lamp Driver | 60.00 |
| VSC-00407 | I.C., ADG406BN Multiplexer | 28.00 |
| Switches | ||
| Part Number | Description | *SNI Price |
| 10-002-035 | Switch Guard, Round (for VSW-00001) | 30.00 |
| AHT-12122 | Foot Switch (Table Assembly) | 86.00 |
| AHT-12124 | Foot Switch, 2 SPDT switches in one, 2 stage fluoro foot switch | 173.00 |
| VSW-00001 | Switch, round, lighted | 30.00 |
| VSW-00010 | Micro Switch | 15.00 |
| VSW-00016 | Switch (Motion Enable, Over-ride) | 18.00 |
| VSW-00018 | Switch, Momentary, Round, PCB Mount (Aspirin Button Switch for Digital Remote Console) | 4.00 |
| VSW-00020 | Switch, Toggle, PCB Mount (Hand Pendant) | 18.00 |
| VSW-00031 | Switch, Room Light Control (Hand Pendant) | 16.00 |
| VSW-00032 | Switch, Momentary, PCB Mount (Hand Pendant) (Collimator, SSD, Center, Recenter, On) | 18.00 |
| VSW-00038 | Switch, Momentary, with red LED (Hand Pendant) (Off) | 24.00 |
| VSW-00041 | Toggle Switch (PC Remote Console) (requires (2) VSW-00042) | 22.00 |
| VSW-00042 | Switch Cover Insert (2 required for VSW-00041) | 3.75 |
| VSW-00043 | Switch, Square, Momentary (PC Remote Console) | 25.00 |
| VSW-00044 | Switch, Momentary, Illuminated (PC Remote Console) | 27.00 |
| HAND PENDANT CONTROL | ||
| Part Number | Description | *SNI Price |
| KEE-00385-020 | Hand Pendant Assembly 'Cylinder Style' Complete with Controller Board, Switches, and Housing [see KEE-02001 and KEE-02002 for cables] | 1,700.00 |
| KEE-02001 | Hand Pendant Cable, Round, shielded, 75 feet | 202.00 |
| KEE-02002 | Hand Pendant Ribbon Cable, shielded, 50 feet | 325.00 |
| MECHANICAL ASSEMBLIES | ||
| Part Number | Description | *SNI Price |
| 12-010-LSA | Lead Screw Assembly, Side Pedestal Table | 1,849.00 |
| 12-015-017 | Table Floor Lock Mechanism, with square brake pad modification | 190.00 |
| 12-051-LSA | Lead Screw Assembly, SAD or SID | 1,882.00 |
| 12-081-LSX | Lead Screw Assembly, II Lateral Carriage | 906.00 |
| 12-081-LSY | Lead Screw Assembly, II Longitudinal Carriage | 995.00 |
| MOTORS, GEARBOXES, and CLUTCHES | ||
| Part Number | Description | *SNI Price |
| 12-010-018 | Motor, Table Elevate | 720.00 |
| AEC-25018 | Clutch, 24V Field & Rotor Assy, 1/2 inch bore | 237.00 |
| AEC-40060 | Clutch, 90V Field and Rotor Assy., 0.750 inch bore | 330.00 |
| AEC-40062 | Clutch, 24V Field & Rotor Assy, 0.875 inch bore | 470.00 |
| AES-43111 | Solenoid, 24v | 310.00 |
| ASM-00040 | Motor & Gearhead, 173:1 ratio, 12V, 55rpm | 239.00 |
| ASM-00050 | Motor, 1/125 HP, 115V AC (Wire Device Rotate) | 249.00 |
| ASM-00051 | Gearhead (mate with ASM-00050) 90:1 ratio (Wire Device Rotate) | 276.00 |
| ASM-01988 | Motor, 24V | 393.00 |
| ASM-02318 | Motor, 24V | 450.00 |
| ASM-03403 | Motor, 24V | 208.00 |
| ASM-14613 | Motor, 1/3 HP, 1725 rpm, 90V | 565.00 |
| ASM-14621 | Motor, 1 HP, 1725 rpm, 90V | 598.00 |
| ATG-06500 | Gear Box, with GB23 pinion gear and pulley (Gantry) | 892.00 |
| ODDS and ENDS | ||
| Part Number | Description | *SNI Price |
| 12-090-000 | Vertical Pointer Alignment Tool | 187.00 |
| ALS-00100 | SSD Light Assembly | 1,100.00 |
| AHK-00100 | Bellows, table vertical | 250.00 |
| DRP-CLP | Cable Drape Cable Clamp | 50.00 |
| LUB-001 | Grease, 1 pint can, for lead screws | 10.00 |
| MAN-001 | Manual, Kermath Therapy Simulator | 200.00 |
| All hardware used on the Simulator is available, metric and American, stainless and all others. | ||
| REMOTE CONSOLES | ||
| Part Number | Description | *SNI Price |
| KEE-00317-040 | Digital Remote Console Assembly with 65 foot cables Remote Operator Control Console with built-in 7 segment Position Displays and I.I. X/Y joystick control | 9,800.00 |
| KEE-00910-010 | PC Remote Console Assembly with 50 foot cables Remote Operator Control Console with I.I. and Table Top X/Y joystick controls, used with PC Remote Computer. | 5,485.00 |
| SOFTWARE | ||
| Software for all versions of Simulator control systems is available, configured specifically to each unit’s component list and site applications. Please call for pricing. | ||
| STRING POTENTIOMETER ASSEMBLY | ||
| Part Number | Description | *SNI Price |
| 12-060-000 | String Potentiometer Assembly | 319.00 |
| [price without core return] | [425.00] | |
| TABLE TOPS | ||
| All styles of Table Tops are available - please call for pricing. | ||
| WALL DISPLAY | ||
| Part Number | Description | *SNI Price |
| KEE-00314-020 | Wall Display Assembly, with Controller and 9 Receiver PCBs | 7,000.00 |
| X-RAY and IMAGING: | ||
|---|---|---|
| ACCESSORIES | ||
| Part Number | Description | *SNI Price |
| XRA-004 | Timer Board, Machlette Collimator | 385.00 |
| XRA-023 | X-ray Grid, 103 line, 10:1 ratio, 40-72 in. focal distance, size 15x18 in. | 350.00 |
| XRA-028 | 17 inch (diagonal) Fluoroscopic Monitor | 890.00 |
| XRA-033 | Motor, 24V 3W 2RPM (for Collimaster M150-MOT) | 482.00 |
| XRA-043 | Solid State Laser, Cross | 1,950.00 |
| XRA-044 | Solid State Laser, Sagittal | 1,950.00 |
| XRA-046 | Collimator, Machlette (M150-MOT) | 5,980.00 |
| CAMERAS | ||
| Part Number | Description | *SNI Price |
| CCD-001 | CCD camera with Last Image Hold | 7,800.00 |
| LIH-001 | Last Image Hold System | 3,200.00 |
| XRA-020 | Vidicon Tube | 1,230.00 |
| XRA-040 | Camera, Vidicon | 7,500.00 |
| IMAGE INTENSIFIERS | ||
| Part Number | Description | *SNI Price |
| XRA-074 | 9 inch Image Intensifier; for replacement or direct-mount camera | 13,874.00 |
| XRA-075 | 9 inch Image Intensifier with Right Angle Adapter | 17,030.00 |
| XRA-076 | 12 inch Image Intensifier; for replacement or direct-mount camera | 23,132.00 |
| XRA-077 | 12 inch Image Intensifier with Right Angle Adapter | 27,350.00 |
| X-RAY GENERATORS | ||
| Sedecal | Sim Net Inc. is a dealer for Sedecal, specializing in High Frequency X-ray Generators. Models typically used in Radiation Therapy range from 40kW to 80kW, with single- or three-phase power requirements. Features include Constant Potential Radiographic exposures and Pulsed Fluoroscopic exposures. Options include ABS, Anatomical Programmer, and Integrated High Speed Starter. Many options are available - please call for more information and pricing. | |
| Raytheon | Sim Net Inc. has accumulated a warehouse of Raytheon RMX-625/650 R & R/F generators. While no longer supported by the manufacturer, Sim Net Inc. has many years of experience with these workhorses, and can provide in-house tested components up to complete systems, with technical support. | |
| Fischer Imaging | Numerous parts are available from Sim Net Inc. for the discontinued and unsupported Fischer CFX and Micro-80/100 lines of X-ray Generators. | |
| emd Technologies (Electromed) | Sim Net Inc. is a dealer for emd Technologies, and we continue to provide parts and support for the aging EDEC 60 and EDEC 80 generators. We can also provide parts for Compact-X series systems. | |
| X-RAY GENERATOR PARTS | ||
| Part Number | Description | *SNI Price |
| XRA-007 | EDEC-7454.00 VR board Calibrator kit and EDEC-7642.00 Opto Test kit with documentation | 1,000.00 |
| XRA-008 | EDEC-7756.00 VR Board Opto Isolator | 265.00 |
| XRA-008-R | EDEC VR board repair (replace opto or swap PCB IF ALL FETs O.K.) Replacement of Opto Isolator using new EDEC-7756.00-R1 at S.N.I. on customer’s EDEC-5940.01 or 7918.01 VR Brd. -OR- Swap-out of EDEC-7918.01 or .04 VR Brd. for 7918.01 with new Opto Isolator or 7918.04 VR Brd. NOTE: If board has faulty FETs, see XRA-008-T | 303.00 |
| XRA-008-T | Trade-in of (20) EDEC-5940.01 for (20) 7918.01 or 7918.04 VR Brds. (price each)
-OR- Electromed repair of faulty EDEC-5940.01, 7918.01 or 7918.04 VR Brd NOTE: If board has TOO MANY faulty components, see XRA-009 or XRA-009-R | 494.00 |
| XRA-009 | EDEC-7918.04 Voltage Regulator PCB | 1,400.00 |
| XRA-009-R | EDEC-7918.01 or .04 Voltage Regulator PCB, refurbished | 1,120.00 |
| XRA-010 | EDEC-8224.00 Current Sensor Brd. Opto Isolator | 490.00 |
| XRA-010-S | Swap-out of EDEC-5926.00 Current Sensor Brd. w/ EDEC-8224.00-R1 Opto Isolator on replacement board | 510.00 |
| X-RAY TUBES | ||
| Part Number | Description | *SNI Price |
| LUB-002 | Electrical Insulating Compound #4 5.3oz | 21.00 |
| XRA-015 | X-ray Tube, A-292 / B150, 12 degree target, 0.6/1.2 f.s., 400,000 HU, 90 degree horns, and thermal switch | 8,704.00 |
| XRA-022 | Rubber Gasket (for Federal Standard High Voltage Cable) | 12.00 |
| XRA-031-30 | Cable, High Tension, with Federal Terminations, 30ft. | 620.00 |
| XRA-031-35 | Cable, High Tension, with Federal Terminations, 35ft. | 670.00 |
| XRA-031-40 | Cable, High Tension, with Federal Terminations, 40ft. | 720.00 |
| XRA-031-45 | Cable, High Tension, with Federal Terminations, 45ft. | 770.00 |
| XRA-031-50 | Cable, High Tension, with Federal Terminations, 50ft. | 820.00 |
| XRA-036 | X-ray Tube, DX-62U/69B1 0.6/1.2 f.s. | 7,537.00 |
| XRA-036-1 | X-ray Tube, DX-62U/67B1 0.6/1.0 f.s. | 7,537.00 |
| XRA-045 | Cooling Fan Assembly, X-ray Tube mount for B-150 housing (includes additional power cable 35ft.) | 560.00 |